Welcome to yet another edition of my 3d printing drama adventures,
In this one I talk about the drama with 2 of my printers
Let's start with my biggest printed, it is featured in the picture above with me sitting next to it, I am 6ft5 and as you can see this printer is huge but why is it on it's side ?
Let's get into the drama long story short, I updated the software on it when I was not supposed to do that, and this lead to me breaking the printed, luckily there is way to fix it but I needed to get an adapter to re install software on the printers memory chip.
The adapter was fairly cheap and I got it next day with amazon the next hurdle was having to take the whole bottom plate from this beast to get access to the chip.
Right above is the printers mother board with the chip
I took it out and put into the adapter plug into the computer and it's not reading
Let's try it another way, did I place some sexual stuff in the pic to get your attention maybe 🤣
Well that did the trick and I was able to reinstall the software and pop the chip back in, the good thing out of doing all this work was discovering this storage drawer the printer got 🤣
So this one was with my most recent printer it's not even a month old but I noticed it was leaking I pulled out the hot end and confirmed there was a leak, I got in touch with the companies support and they promptly send out a replacement, well I wanted to see if I could save this nozzle and not have to wait for the replacement
I plugged it in not fully installed started the heating and put a some paper towel to catch the goop a fair bit dripped off and the rest I wiped away with the paper towel.
As you can see it came out fairly clean but I broke the nozzle trying to take it off, oh well I didn't want to wait so I also ordered the part on amazon to get up and running the next day it's under 20 bucks for the part, a week later I got the one from the company too so now I got an extra nozzle.
These new ones should be better and not crap out so quickly either way.
I am at 5/6 printers working I will have one more to tackle the nozzle on it may have gotten worn and needs to be replaced but I will have to tackle that another time.
We got 40 participants for our reblog lottery this time around.
@angeluxx @caspermoeller89 @daniasi @dgi @duckmotor @dynamicgreen @ecencypoints @eolianpariah2 @esbat @familyhistory @ferod23 @florakese @freesinger @henruc @henrysw @jhonnygo @jorgebgt @khantaimur @kungfukid @ladymisa @logen9f @moonthumb @mxm0unite @necho41 @olaf.gui @patience2 @pepetoken @poetchick4jesus @prapledragon @rebe.torres12 @revolverocelotyt @theroad2freedom @trautenberk @txrose @vaynard86 @vrezyy @weone @ydm6669 @youloseagain and @yova
and the winner this time around is....
Looks like a dud, better luck next time !
@trautenberk! Congratulations enjoy your 10% profit share on this post, 0.33 DUO tokens, 5 HBI units more about HBI units here
The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 10% profit share, 0.33 DUO token and 5 HBI units (bonus wheel) on my next post
This is all done automatically and I apply the winner to be a beneficiary for the post.
Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.
I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.
@bitcoinman's bits of wisdom
BUY/SELL PRECIOUS METALS WITH HBD + PRECIOUS METALS TOOLS AND ACCESSORIES
You can find out more about the #silvergoldstackers community in this post here
Day | Post |
---|---|
Monday | Art&3D |
Tuesday | |
Wednesday | |
Thursday | |
Friday | Stacker of the week |
Saturday | Lazy Saturday post |
Sunday |
10% of this post earnings go to @trautenberk for being our reblog lottery winner.
That's it for today's post thanks for stopping by your support is truly appreciated.
Posted Using InLeo Alpha
I am extremely lucky this week!
Thank you.
que se mejore tu impresora
reblogged
!PIZZA
!LUV
!WEIRD
@bitcoinman, @moonthumb(1/3) sent you LUV. | tools | discord | community | HiveWiki | <>< daily
!BBH !DOOK
You just got DOOKed!
@pepetoken thinks your content is the shit.
They have 1/400 DOOK left to drop today.
Learn all about this shit in the toilet paper! 💩
!hiqvote
@bitcoinman, the HiQ Smart Bot has recognized your request (1/4) and will start the voting trail.
In addition, @bitcoinman gets !LOL from @hiq.redaktion.
For further questions, check out https://hiq-hive.com or join our Discord. And don't forget to vote HiQs fucking Witness! 😻
You received an upvote of 86% from Precious the Silver Mermaid!
Please remember to contribute great content to the #SilverGoldStackers tag to create another Precious Gem.
@bitcoinman! @pepetoken likes your content! so I just sent 1 BBH to your account on behalf of @pepetoken. (1/100)
$PIZZA slices delivered:
@moonthumb(1/15) tipped @bitcoinman
(1/5)
@bitcoinman! @moonthumb Loves this weirdness!!! so I just sent 1 WRD to your account on behalf of @moonthumb.