Last Thursday I mentioned in my post that I was really tired and confused the day for a Friday, think that's bad well it got worse.
The kids saw their mom today so I got a fair bit of rest, took a nice mid day nap.
Anyway back to the Thursday drama
So I got a new printer that arrived on Thursday I started to assemble it and close to the end I had to cut a zip tie holding the z axis to the top of the frame, well I was so tired I somehow snipped 3 wires instead of the zip tie I was fairly bummed messing up a brand new machine.
Luckily I got the tool and the knowhow to fix it, I stripped some of the wires and then I used some painters tape to test out my wiring before soldering everything back up, would be a shame if I soldered the wires and then realized I did not connect the right wires, so the painters tape did the trick I made a quick test and the component was working.
The next day I soldered the wires, right below is a progress picture with 2 of the 3 wires soldered and sealed in shrink tubing.
This new printer is very nice a large build volume and it's fairly quick as you can see my print farm is growing but things aren't always as they seem, 2 of the printers are not working at the moment, the 2 you see on the wooden table I made and shared about a few Saturdays ago.
I been struggling with the orange Prusa printer it's a great machine but has been causing me a lot of issues I am going to have to check out one more bearing and hopefully that's the issue, I can replace it and the printer can be back in action.
The blue one under the table has been giving me some poor quality and was also printing a little offset from the center reducing the total build area so I was trying to update the firmware with the manufacturers software it' supposed to be easy one click and you done, well one click and the printer is done, the firmware update ended up breaking the printer, as of now I power it on and the control screen for it is black, I tried to install some other firmware but no success yet, I will have to try again, I should be able to get it back up and running but the quality issues are likely still going to be present and I will have to address them too but at this point I just want to make it work so it's not just a heavy paper weight.
I also want to announce a new series that I will be starting soon, So I am an artist and a big fan of art, I will be 3d printing art and posting about it here on my blog, giving information about the art as well as my review on it, I already printed a few pieces for this series and looking forward to sharing them with you all.
We got 36 participants for our reblog lottery this time around.
@angeluxx @bitandi @blitzzzz @daddydog @daenerhys @daniasi @dgi @duckmotor @ecencypoints @ekads @ene22 @esbat @ferod23 @florakese @fredaig @guurry123 @henruc @hive.games @hjrrodriguez @kungfukid @ladymisa @logen9f @mirroredspork @monsterbuster @nabbas0786 @olaf.gui @phasewalker @psyber-x @psyberx.leo @servelle @stekene @trautenberk @vaynard86 @vrezyy @ydm6669 and @youloseagain
and the winner this time around is....
What a tease so close but we got a dud.
@duckmotor! Congratulations enjoy your 10% profit share on this post and 5 HBI units , more about
The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 10% profit share on my next post and 5 HBI units (bonus wheel)
This is all done automatically and I apply the winner to be a beneficiary for the post.
Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.
I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.
@bitcoinman's bits of wisdom
BUY/SELL PRECIOUS METALS WITH HBD & PRECIOUS METALS TOOLS AND ACCESSORIES
You can find out more about the #silvergoldstackers community in this post here
Day | Post |
---|---|
Monday | |
Tuesday | |
Wednesday | |
Thursday | |
Friday | Stacker of the week |
Saturday | Lazy Saturday post |
Sunday |
10% of this post earnings go to @duckmotor for being our reblog lottery winner.
10% goes to the HOC community account
That's it for today's post thanks for stopping by your support is truly appreciated.
Posted Using InLeo Alpha
Quite lucky you could already fix it mate....
So the printer problems continues 😂😂😂
They don't stop, I got bad luck or perhaps it's my neglect on maintenance I guess we will never know 🤣 !BBH !LOL
@seki1! Your Content Is Awesome so I just sent 1 $BBH (Bitcoin Backed Hive) to your account on behalf of @bitcoinman. (1/50)
😂😂😂
I wish you luck
I'm glad you were able to fix it! I've always wanted to play with one of those printers, but I always have too many other projects going on. I'll have to change that one of these days, I'll be asking your advice before I jump in though!
!BBH
Yeah was fairly simple fix and wasn't a critical component anyway but still brand new machine and I snip wires 🤣 no worries whenever you looking to get into it don't hesitate to reach out I'll help as best I can !BBH !LOL !PIMP
You must be killin' it out here!
@bitcoinman just slapped you with 1.000 PIMP, @thebighigg.
You earned 1.000 PIMP for the strong hand.
They're getting a workout and slapped 1/3 possible people today.
Read about some PIMP Shit or Look for the PIMP District
!hiqvote
@bitcoinman, the HiQ Smart Bot has recognized your request (1/3) and will start the voting trail.
In addition, @bitcoinman gets !PIZZA from @hiq.redaktion.
For further questions, check out https://hiq-hive.com or join our Discord. And don't forget to vote HiQs fucking Witness! 😻
$PIZZA slices delivered:
@hiq.smartbot(3/5) tipped @bitcoinman
You received an upvote of 89% from Precious the Silver Mermaid!
Please remember to contribute great content to the #SilverGoldStackers tag to create another Precious Gem.
Nice patch-job, man.
!ALIVE
Lol thanks I'm glad I'm not a total waste and could perform this easy fix , would be nice to not cut the wires in the first place but oh well 🤣 !BBH
HSBI
Reblogged AND Upvote
@nahueldare3627
!LOL
Reblogged !WEED
@bitcoinman!
@nabbas0786 passed you the virtual joint!If you do not want to receive these comments, please reply with !STOP
Congratulations @bitcoinman! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)
Your next target is to reach 21500 replies.
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOP
Reblogged & Upvote 😎
!LOLZ
good luck with your new toy
It's not a toy it's a serious tool 🤣 !BBH