3d design & printing for silver casting /Reblog Lottery DUO BONUS !

Not long ago I shared some silver as well as my onboarding effort for X user silverlynx,
He reached out to me and was wondering if I can make him some custom stuff for his casting operation.

I agreed, he provided a picture of his logo on a shield and I turned it into a 3d model ready for printing.

I also got my self a smaller nozzle for the 3d printer to be able to get even more detail, I got 2 nozzle a few keeps later below is a picture of one of them.

It took some tinkering to get the setting right for this new nozzle but after a little while I was getting good quality prints, I think I will make another post that goes in depth into printer nozzles.

I set the model I made for him along with a casting support system I cam up with.
but as you can see bellow It didn't work out

I very quickly realized the nozzle got worn down, now wear and tear is normal but for a 5 hour total print time that is totally unacceptable, I did have another that came with it, I got my money back for the nozzle and the second seems to be holding up, so maybe one of them was somehow a dud.

With this second fine nozzle I printed a few more shield some without my support system,
The one bellow is printed in ASA a material that is a lot stronger.

Then I tried to make some with PVB a alcohol soluble material I sprayed some on it to try and make a smoother finish hiding the print lines, however I am not sure it worked great and may end up drowning out some detail, also I think with sand casting the amount of detail is limited so trying to get a super smooth surface will not be helpful.

I printed him a couple out if different materials the gif above is of a failed print you may notice the tip of the shield lifted resulting in poor detail in that section, that was on me and my bed temperature was a tab to low.

---

Reblog lottery

We got 33 participants for our reblog lottery this time around.

@blitzzzz @bntcamelo @caspermoeller89 @chaosmagic23 @cup-bearer @daddydog @duckmotor @ekads @ferod23 @guurry123 @henruc @hjrrodriguez @jenam @jhonnygo @jorgebgt @ladymisa @miriammarga @monsterbuster @mxm0unite @necho41 @olaf.gui @rebe.torres12 @rosauradels @seki1 @servelle @stekene @sylmarill @trautenberk @vaynard86 @vrezyy @ydm6669 @youloseagain and @yova

and the winner this time around is....

Looks like we got a dud better luck next time !

@bntcamelo! Congratulations enjoy your 10% profit share on this post, 0.33 DUO tokens, 5 HBI units more about HBI units here

The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 10% profit share, 0.33 DUO token and 5 HBI units (bonus wheel) on my next post

This is all done automatically and I apply the winner to be a beneficiary for the post.

Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.

---

I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.

@bitcoinman's bits of wisdom

• Invest only what you can afford to lose and be mindful of the potential risks.
• Unless you can accept delivery stay away from futures and stick to physical.
• Leverage is a great tool for losing money fast.
• Numismatics for the lows stick to smart stacking baby.
• Be cautious of new schemes in crypto, like ICOs, DeFi, and NFTs, do your research before investing.

---

BUY/SELL PRECIOUS METALS WITH HBD + PRECIOUS METALS TOOLS AND ACCESSORIES

---

Buy DUO and stake to receive Hive dividends, tip others, have your posts curated and grow Hive!
Learn more about DUO here
https://tribaldex.com/trade/DUO
https://hive-engine.com/trade/DUO

You can find out more about the #silvergoldstackers community in this post here

HOC Hive Onboarding Committee discord link here

---

Weekly Post Schedule

---

Profit share

10% of this post earnings go to @bntcamelo for being our reblog lottery winner.
10% goes to the HOC community account

---

That's it for today's post thanks for stopping by your support is truly appreciated.

Posted Using InLeo Alpha